Made per photo | Customised Product | Classic Woodcraft

• Tape Measure (clearly marked in mm/cm)
• Square (if confirming right angles or straight edges)
• Camera or Smartphone (ensure good image quality)
• Clean Background

• Place the product flat on a clean surface.
• Position the tape measure along one edge, aligning the starting point (0 mm) clearly at one end.
• Ensure tape measure markings are clearly readable.
• Take a clear, straight-on photo from the front.

• Rotate the product 90 degrees.
• Place the tape measure clearly aligned to the product's height or depth.
• Take a clear side-angle photo showing the measurement.

• Photograph the product from directly above.
• Position the tape measure clearly visible alongside length and width.
• If helpful, use two tape measures to show both dimensions simultaneously.

• Take close-up shots of important details such as carvings, textures, engravings, or special features.
• Always include a tape measure clearly in the frame for precise size reference.
• If specific angles or edges must be clear, use the square as reference.

• Clearly photograph and highlight any hidden or internal parts.
• Add notes or arrows digitally or on paper if necessary, clarifying what the photo shows.

• Good Lighting: Natural daylight or well-lit indoor conditions preferred.
• Readable Measurements: Ensure numbers on the tape measure are sharp and legible.
• Avoid Blocking Details: Never obscure key parts with tools or hands.
• Stable Shots: Use a tripod or stable surface to avoid blurry images.

When finished, please:

• Label clearly: Include clear dimension labels if necessary.
• Number your photos: For example, Front_01, Side_02, Top_03, Closeup_04.
• Upload and email: Submit all photos together clearly labeled.